Linear white LED surface, LED substage
SmartScope® M50 is the next evolution of the worldwide standard in 3D multisensor metrology.
The patented IntelliCentric™-M Optical System features fully telecentric fixed lens optics and VIRTUAL ZOOM™ technology, paired with a high-density 20 MP digital metrology camera and a built-in electronic aperture, delivering an ultra-high-resolution image with low distortion – perfect for high-speed edge detection metrology.
Ultra-High-Resolution Images – All LED coaxial, substage profile, and SmartRing™ light illumination comes standard
Sturdy, Stable Construction – Fixed granite bridge and base rest on a sturdy steel support structure to provide a rigid, orthogonal structure for measurement stability
Multisensor Versatility – Optional TP-20 and TP-200 touch probes, SP-25 Scanning Probe, Feather Probe™, Through-the-Lens (TTL) Laser, Rainbow Probe™, TeleStar® Probe
| Standard | Optional | |
| XYZ Travel | 450 x 600 x 200 mm | Extended Z-axis: 300 or 400 mm |
| XYZ Scale Resolution | 0.1 μm | 0.05 µm |
| XYZ Volumetric Accuracy | E3 = (3.0 + 5L/1000) μm | |
| XY Area Accuracy | E2 = (1.8 + 5L/1000) μm | |
| Z Linear Accuracy | E1 = (2.5 + 5L/1000) μm | E1 = (2.0 + 5L/1000) µm (requires touch probe or TTL laser) E1 = (1.5 + 5L/1000) µm (requires TeleStar Probe) |
Focus™ Contour Projector® systems are high quality, full-function 14” optical comparators with the most advanced technology available and offer:
Vectored light control – Versatile TruLight® LED lighting illumination
Keep lenses safe and ready for use – 3 position internal lens turret
Ideal for real world, shop floor environments in a benchtop configuration – Rigid, all steel construction and solid metal castings
Optional VidiProbe video measurement, optional motorized servo drives, and optional Projectron automatic internal edge detection
XY Travel
Standard
12” x 5”
c-vision™ Benchtop Video Contour Projector® is an easy to use, dual-magnification benchtop video contour projector. This rugged horizontal optical comparator features a compact footprint that uses very little floor space. Its rugged design and 60 lb load capacity put advanced automatic video measurement capability to work right where it is needed. Precision optics and SNAP-X Compare electronic overlay charts make comparative inspections easy. c-vision Benchtop provides:
Accurate Image with exceptionally low distortion over entire 3-inch viewing area – Telecentric dual magnification optical system with advanced digital imaging technology
Shop hardened and convenient benchtop – High payload capacity, easy to use interface. Motorized XY table motion with precision linear scales and manual fine adjusters
Display both standard and custom overlay charts – SNAP-X Compare software
XYZ Travel
Standard
15” x 6” x 2”
Lazer 200 is an innovative non-contact measuring system that uses laser scanning and video support for surface topography measurements.
The Digital Range Sensor (DRS™) laser delivers high quality non-contact laser scans of critical part surfaces.
Lazer 200 features a mechanically innovative “elevated bridge” design that creates the most compact system of any machine with comparable travel
Chassis axial straightness and perpendicularity are machined in Z-axis travel keeps the DRS laser within its capture range throughout the scan
Integral on-axis video imaging is used to locate the part, set datums, and choose laser scan start and stop point
Standard
200 x 200 x 100
Linear white LED surface, LED substage
0.125 µm
The SmartScope E7 is a benchtop, fully automatic 3-axis video measuring system designed for high-precision dimensional inspection and quality control. It is part of the SmartScope E-Series and is built for reliable, repeatable measurements in production and inspection environments.
The system uses a fixed-lens IntelliCentric optical system paired with a high-resolution color camera and digital zoom, allowing fast magnification changes without mechanical lens movement. This design improves stability, speed, and measurement accuracy. Advanced LED illumination, including coaxial, profile, and ring lighting, provides clear edge definition and surface detail for a wide range of parts.
SmartScope E7 features a rigid cast base and a precision motorized stage for smooth, accurate motion across all axes. It supports fully automated measurement routines and can be expanded with optional touch probe sensors for true multisensor 2D and 3D measurement capability.
| Standard | Optional | |
| XYZ Travel | 250 x 150 x 200 mm | Extended X-axis, 300 mm |
| XYZ Scale Resolution | 0.1 μm | |
| XY Area Accuracy | E2 = (2.2 + 5L/1000) µm | |
| Z Linear Accuracy | E1 = (3.8 + 5L/1000) μm | E1 = (2.8 + 5L/1000) μm (requires optional E 4.5 lens) |
