Linear white LED surface, LED substage
ShapeGrabber Ai620 3D scanner is a precision, metrology-class 3D scanner. Ai620 measures the complete surface of complex shaped plastic, metal, and 3D printed parts in minutes with a high density of data points.
Ai620 is easy to use and highly automated. After an initial scan, the same scanning parameters may be used for subsequent parts, delivering consistent results irrespective of operator skill or experience. There is no need to write special code. ShapeGrabber Ai620 offers:
Faster Speed – When used at its maximum scan volume, the SG198 scanhead measures data at 155,000 points per second. For parts that do not require the full scan volume, the data rate increases to more than 1.5 million pts/s. Optional 25° tilt mechanism for faster, more complete part coverage without part reorientation.
Better Data Quality – The SG198 scanhead features an optical arrangement that draws on OGP’s 75+ years of experience designing optical systems for precision measurement. The sensor optics provide extremely low noise data that far outperforms other 3D scanning technologies.
Higher Resolution – The built-in 5MP imager delivers depth resolution and data densities for the most challenging applications. The combination of such high resolution in a relatively large volume makes the entire process of measuring complex shaped parts faster and easier
Wider Dynamic Range – ShapeGrabber scanheads offer high dynamic range, accurately measuring a wide variety of materials, colors, textures, and finishes without the need for surface treatments. The SG198 scanhead handles the full range – from matte black plastic, to bare metal, to grainy castings and 3D printed parts.
Max Scan Volume (mm)
Standard
600 L x 185 Ø with SG198 Scanhead
Focus™ Contour Projector® systems are high quality, full-function 14” optical comparators with the most advanced technology available and offer:
Vectored light control – Versatile TruLight® LED lighting illumination
Keep lenses safe and ready for use – 3 position internal lens turret
Ideal for real world, shop floor environments in a benchtop configuration – Rigid, all steel construction and solid metal castings
Optional VidiProbe video measurement, optional motorized servo drives, and optional Projectron automatic internal edge detection
XY Travel
Standard
12” x 5”
c-vision™ Benchtop Video Contour Projector® is an easy to use, dual-magnification benchtop video contour projector. This rugged horizontal optical comparator features a compact footprint that uses very little floor space. Its rugged design and 60 lb load capacity put advanced automatic video measurement capability to work right where it is needed. Precision optics and SNAP-X Compare electronic overlay charts make comparative inspections easy. c-vision Benchtop provides:
Accurate Image with exceptionally low distortion over entire 3-inch viewing area – Telecentric dual magnification optical system with advanced digital imaging technology
Shop hardened and convenient benchtop – High payload capacity, easy to use interface. Motorized XY table motion with precision linear scales and manual fine adjusters
Display both standard and custom overlay charts – SNAP-X Compare software
XYZ Travel
Standard
15” x 6” x 2”
Lazer 200 is an innovative non-contact measuring system that uses laser scanning and video support for surface topography measurements.
The Digital Range Sensor (DRS™) laser delivers high quality non-contact laser scans of critical part surfaces.
Lazer 200 features a mechanically innovative “elevated bridge” design that creates the most compact system of any machine with comparable travel
Chassis axial straightness and perpendicularity are machined in Z-axis travel keeps the DRS laser within its capture range throughout the scan
Integral on-axis video imaging is used to locate the part, set datums, and choose laser scan start and stop point
Standard
200 x 200 x 100
Linear white LED surface, LED substage
0.125 µm
The SmartScope E7 is a benchtop, fully automatic 3-axis video measuring system designed for high-precision dimensional inspection and quality control. It is part of the SmartScope E-Series and is built for reliable, repeatable measurements in production and inspection environments.
The system uses a fixed-lens IntelliCentric optical system paired with a high-resolution color camera and digital zoom, allowing fast magnification changes without mechanical lens movement. This design improves stability, speed, and measurement accuracy. Advanced LED illumination, including coaxial, profile, and ring lighting, provides clear edge definition and surface detail for a wide range of parts.
SmartScope E7 features a rigid cast base and a precision motorized stage for smooth, accurate motion across all axes. It supports fully automated measurement routines and can be expanded with optional touch probe sensors for true multisensor 2D and 3D measurement capability.
| Standard | Optional | |
| XYZ Travel | 250 x 150 x 200 mm | Extended X-axis, 300 mm |
| XYZ Scale Resolution | 0.1 μm | |
| XY Area Accuracy | E2 = (2.2 + 5L/1000) µm | |
| Z Linear Accuracy | E1 = (3.8 + 5L/1000) μm | E1 = (2.8 + 5L/1000) μm (requires optional E 4.5 lens) |
