Linear white LED surface, LED substage
Lazer 200 is an innovative non-contact measuring system that uses laser scanning and video support for surface topography measurements.
The Digital Range Sensor (DRS™) laser delivers high quality non-contact laser scans of critical part surfaces.
Lazer 200 features a mechanically innovative “elevated bridge” design that creates the most compact system of any machine with comparable travel
Chassis axial straightness and perpendicularity are machined in Z-axis travel keeps the DRS laser within its capture range throughout the scan
Integral on-axis video imaging is used to locate the part, set datums, and choose laser scan start and stop point
Standard
200 x 200 x 100
Linear white LED surface, LED substage
0.125 µm
Fusion® 400 systems from OGP are 3D capable, high accuracy large field-of-view (LFOV) multisensor floor model systems with a measuring range of 400 x 300 x 250 mm.
Optics – Dual optical paths with an instantaneous magnification change between a low mag with 100 mm viewing area and high mag for small feature measurement and autofocus, fully telecentric for image accuracy.
Stable Platform – Solid cast base with a granite surface plate and compound stage allow for extremely accurate measurements.
Multisensor Versatility – Optional touch probe, Scanning Probe, TeleStar TTL laser, Rainbow Probe, and 4th and 5th axis rotary indexers. All sensors share are placed precisely on the optical centerline by the patented rotational deployment mechanism
Productivity – 3D CAD-based ZONE3 metrology software, with integral AutoID and FeatureExtractor functions for one touch measurement. Full field image processing and high-speed cameras allow entire scenes to be measured instantly
| System | Standard | Optional |
| XYZ Travel | 350 x 250 x 250 mm | |
| XYZ Measuring Range (max) | 420 x 320 x 250 mm | |
| XYZ Scale Resolution | 0.1 μm | 0.05 µm |
| XY Area Accuracy | E2 = (1.8 + 4L/1000) µm | |
| Z Linear Accuracy | E1 = (2.0 + 5L/1000) µm (requires optional scanning probe or TeleStar Plus TTL Laser) | |
Metrology Grade 3D Scanning – Ideal for measuring complex shapes in a variety of colors and finishes due to a 360° rotary table and vertical motion. Excels in rapid prototyping, manufacturing, quality control, and reverse engineering applications.
Ease of Use – Scans can be initiated with one click, delivering consistent measurement results by any operator. Scanning parameters are easily selected and saved – there is no need to write special code.
Accurate, High Density Point Data– The SG108 scanhead moves vertically on a high precision motion assembly and can obtain more than 1,500,000 points per second.
BENCHTOP SYSTEM FOR FULLY AUTOMATED 3D LASER SCANNING
Max Scan Volume (mm)
Standard
300 L x 100 Ø
ShapeGrabber Ai620 3D scanner is a precision, metrology-class 3D scanner. Ai620 measures the complete surface of complex shaped plastic, metal, and 3D printed parts in minutes with a high density of data points.
Ai620 is easy to use and highly automated. After an initial scan, the same scanning parameters may be used for subsequent parts, delivering consistent results irrespective of operator skill or experience. There is no need to write special code. ShapeGrabber Ai620 offers:
Faster Speed – When used at its maximum scan volume, the SG198 scanhead measures data at 155,000 points per second. For parts that do not require the full scan volume, the data rate increases to more than 1.5 million pts/s. Optional 25° tilt mechanism for faster, more complete part coverage without part reorientation.
Better Data Quality – The SG198 scanhead features an optical arrangement that draws on OGP’s 75+ years of experience designing optical systems for precision measurement. The sensor optics provide extremely low noise data that far outperforms other 3D scanning technologies.
Higher Resolution – The built-in 5MP imager delivers depth resolution and data densities for the most challenging applications. The combination of such high resolution in a relatively large volume makes the entire process of measuring complex shaped parts faster and easier
Wider Dynamic Range – ShapeGrabber scanheads offer high dynamic range, accurately measuring a wide variety of materials, colors, textures, and finishes without the need for surface treatments. The SG198 scanhead handles the full range – from matte black plastic, to bare metal, to grainy castings and 3D printed parts.
Max Scan Volume (mm)
Standard
600 L x 185 Ø with SG198 Scanhead
TurnCheck™ Series-10 systems offer a fast, easy way to measure shafts, cylinders and other turned, ground or extruded parts. Just place the part and press GO.
TurnCheck Series-10 systems are precision optical measuring instruments designed for shop floor environments. TurnCheck systems are rugged and reliable, accommodating parts up to 175 mm diameter by 800 mm in length. TurnCheck will scan and measure a part in seconds using its telecentric, large field of view optical system. With 100 mm wide field of view and vertical range of 400, 600 or 800 mm, TurnCheck Series-10 systems can handle just about any turned or ground part. TurnCheck software allows easy measurement of diameters, lengths, distances, angles, radii, form, position, cylindricity, and runout – and can output point data for external analysis.
The movable tailstock assembly is designed to be easily operated with one hand for precision mechanical alignment of the workpiece. Additional optional workholding kits that fit into the spindle accommodate workpieces that do not have centers. Granite base support for rotary provides a rigid base and isolates vibration.
Measuring Range (mm)
10|40 – 400 L x 100 Ø
10|60 – 600 L x 100 Ø
10|80 – 800 L x 100 Ø
Standard
10|40 – 400 L x 175 ∅
10|60 – 600 L x 175 ∅
10|80 – 800 L x 175 ∅
