DIGITAL ROCKWELL HARDNESS TESTER

EQUIPPED WITH SMART ZERO FUNCTION
Displacement of zero point detection will be easier and smooth by smart zero function
BUILT–IN USB MEMORY UNIT
Enable the tester to perform more efficient load testing. When use in production line, it is not necessary to bring a personal computer into the line. A USB Thumb Drive with stored test result can be taken out from the tester to examine in other place. Measurement conditions can also be store in the USB Memory.
TESTER DATA STORING
With Built in 16GB memory able to store about 10,000 testing result
DISPLAY AND PRINTING
You can see test results and curve of load displacement with high density LCD on the MAX tester and print out through the built-in printer. The CENTRONICS INTERFACE enables the external printer to print test results out in form of test report. (ESCIP based)
DATA PICK UP FUNCTION
The standard test program on the MAX can perform most of general compression/tension load test. Its data pick-up function can pick specific data from test results.
PROGRAM CHANGE THOUGH USB PORT
Since the MAX series is operated with a Test Program that has been installed. It is easy to change the Test Program. In other words, one MAX tester can be use for multiple purposes.
MULTIPLE LANGUAGE TESTER
Tester consists of English, Japanese, Korean & Chinese (Simplified & Traditional) Language. Globalization of manufacturing support and can be used in most part of the world.

Fourier transform infrared spectroscopy (FTIR) is an analysis technique used mainly for structural estimation (qualification) of organic compounds of solid, gas and liquid samples. When molecules are irradiated with infrared rays, they absorb infrared rays equivalent to the vibrational energy between the atoms that make up the molecules. A Fourier Transform Infrared (FTIR) Spectrophotometer is used to estimate and quantify the structure of compounds by examining the degree of absorption. ​FTIR is frequently used in a wide range of structural analysis and non-destructive measurement applications.

Due to the simplicity and versatility of the measurement, FTIR is used for structural identification in many industries and applications. FTIR is incredibly useful for the pharmaceutical industry for both research and quality control of existing products.

Shimadzu offers a complete FTIR product lineup, from the compact FTIR, IRSpirit-X, which provides reliable, versatile and high-performance, and IRXross which provides stable FTIR analysis, to the high-end IRTracer-100 for sophisticated research. Shimadzu FTIR systems, offering high resolution, high sensitivity and simplicity, offer a wide range of solutions.

The whole series meets 05 grade (Highest Grade) of JIS B 7738 Coil Spring Compression / Tension Tester.
• In addition to 1 Step , 2 -Step, 3 -Step Automatic Tests, Free Length, Initial Tension, Solid Length, Peak Load can be measure.
• Unit select able among N, gf, kgf, lbf and inch covered by English version.
• Measurement range can be changed through 2- step high-low range automatic switch over function, there by eliminating unnecessary steps.
• Dual unit (gf, kgf and N) printing is possible through printer setting. 50 Tests conditon can be store by registering model number.
• Test can start immediately once test condition are recall.
• Passing range or Good / Bad assessment is done visually by using screen display and alarm.
• Can connect to Mitutoyo Digimatic Caliper, Micrometer etc.. And data can be printed out.
• Ascend and descend buttons are equipped with inching function.
• Simple movements of 1mm, 0.1mm, (0.001mm) are possible.

“Load test with length input”, load is measured automatically once length is input. (All-Type)
”Length test with Load input”, spring length is measured automatically once load is input. (S-Type, H-Type)
”Deflection load test”, load is measured automatically based on deflection amount resulted from free length. (S-Type, H-Type)
”Load deflection test”, deflection amount corresponding to applied load resulted from free length is measured automatically.
”Step load test”, load is measured as length is step automatically fixed intervals. (H-Type)
”Step length test”, length is measured as load is step automatically fixed intervals. (H-Type)

Radiographic Testing (RT) is a non-destructive testing (NDT) method which uses X-rays to examine the internal structure of manufactured components to identify any flaws or defects. Microfocus X-ray CT scanning is a 3D non-destructive testing (NDT) technique that allows the testing and 3D analysis of various materials in a non-destructive manner. It is widely used in the measurement of automotive parts, resin molded parts, bones, printed circuit boards (PCB), batteries, polymers, etc.

Shimadzu provides a comprehensive lineup of microfocus X-ray CT systems and solutions for high resolution 3D imaging of a wide variety of samples. Our product lineup includes the XSeeker 8000 bench-top X-ray computed tomography (CT) system, which enables clear observation of metal parts included in compact designs; and the inspeXio 7000 high-performance microfocus X-ray CT system, boasting higher resolution and higher contrast CT images with an intuitive user interface. Learn more about our full lineup below.