DUROMETER

Description:

CHARACTERISTICS

ASKER Model F – ASKER Model FP
Exclusive type for foam materials, allowing measurement by placing the tester on the object o measurement.
In addition to Model F, Model FP is available for powder puff.
ASKER Model CS
This features larger indentor and a more strong spring compared to ASKER C, thereby making it more suitable for polystyrene foam.
ASKER Model JA
A hardness tester which conforms with the Japanese Industrial Standards JIS K 6301. One of the most popular types in Japan, but has recently been gradually replaced with the ISO-specified Type A
ASKER Model B
It uses the same spring load used in ASKER Model A. It adopts a conical indentor similar to that of Model D, so as to be applicable to harder measuring objects than can be measured by Model A.
It is useful for hardness measurement of unglazed pottery clay and ceramics
in green condition.
ASKER Model D
Similar to ASKER Model A, this model is defined as ‘Durometer Type D’ as described in various domestic and international standards. It is in widespread
use for hardness measurement of plastics and hard rubber.
ASKER Model C – ASKER Model C2
ASKER Model C is intended for hardness measurement of soft rubber, sponge, foamed elastomers, wound threads(yarn package), rolled films, potter’s clay(kaolin), and other such soft materials.
For even softer materials, Model C2 is available
ASKER Model A
Has been used for wide applications since being standardized in the ISO.
ASKER Model JAL
Especially useful for recessed and/or smaller measuring areas.
In addition to the standard Mode JAL, long presser foot types are available for another Model applications.
ASKER Model JC
ASKER JC have those hardness testers described in JIS K 6301 as ‘suitable for samples found to have a hardness value above 70 according to Model A’. It features higher resolution for hardness measurement of hard rubber.

More Other Products:

Model IT-5 IT-20
Units N.m, kgf.cm, ibf.in
Effective Range +/- 0.02 ~+/- 5.N.m +/- 2 ~ +/- 20N.m
Resolution 0.001N.m 0.01N.m
Accuracy +/- 0.5% of F.S
Maximum Allowable Torque 150%
Maximum Memory Data 511
Comparator Upper & Lower Limit Setting of Specification
A/D Convertor 16 Bit
Response 640Hz/sec
Battery Operated Ni.MH Battery with Power Adaptor
Operating Temperature 10~40 Deg C & Humidity of 85% & Below
Data Output RS232C Interface
Dimension W230 x H60 X D149mm
Mass Approximately 3.3kg

Microfocus X-Ray Inspection Systems

Radiographic Testing (RT) is a non-destructive testing (NDT) method which uses X-rays to examine the internal structure of manufactured components to identify any flaws or defects. Microfocus X-ray inspection is a 3D non-destructive inspection (NDI) technique that allows the testing and 3D analysis of various materials in a non-destructive manner. It is used in a wide range of industries, including the electronics, automotive, semiconductors, and aerospace industries.

Shimadzu provides a comprehensive lineup of microfocus X-ray inspection systems and solutions for high resolution inspection of electronic assemblies, components, and printed circuit boards (PCB). Our product lineup includes the Xslicer SMX-1010/1020, boasting significantly improved image quality and a simplified workflow; and the Xslicer SMX-6010, featuring high-accuracy images with a wide dynamic range that enables detailed observation of internal structures and defects. Learn more about our full lineup below.

Handy Digital Force Gauge

CHARACTERISTICS

Easy operation
Peak hold function
Comparator function
Memory function
Automatic power off
Local Newton value input

Gas Chromatography

Single quadrupole mass spectrometry is a mass detection technology that can be adapted to a wide range of applications. Shimadzu’s single quad GC-MS offers ultimate high-speed and high-efficiency analysis with unparalleled performance to meet your analysis needs in fields such as environmental pollution monitoring, forensics, material science, and more.

Shimadzu’s single quadrupole GC-MS systems provide reliable routine analysis and smart solutions for maximizing the potential of laboratories. Our portfolio includes the GCMS-QP2020 NX and the GCMS-QP2010 SE single quad GC-MS. Browse Shimadzu’s entire product range below.