c-vision™ Benchtop Video Contour Projector® is an easy to use, dual-magnification benchtop video contour projector. This rugged horizontal optical comparator features a compact footprint that uses very little floor space. Its rugged design and 60 lb load capacity put advanced automatic video measurement capability to work right where it is needed. Precision optics and SNAP-X Compare electronic overlay charts make comparative inspections easy. c-vision Benchtop provides:
Accurate Image with exceptionally low distortion over entire 3-inch viewing area – Telecentric dual magnification optical system with advanced digital imaging technology
Shop hardened and convenient benchtop – High payload capacity, easy to use interface. Motorized XY table motion with precision linear scales and manual fine adjusters
Display both standard and custom overlay charts – SNAP-X Compare software
XYZ Travel
Standard
15” x 6” x 2”
SmartScope® M50 is the next evolution of the worldwide standard in 3D multisensor metrology.
The patented IntelliCentric™-M Optical System features fully telecentric fixed lens optics and VIRTUAL ZOOM™ technology, paired with a high-density 20 MP digital metrology camera and a built-in electronic aperture, delivering an ultra-high-resolution image with low distortion – perfect for high-speed edge detection metrology.
Ultra-High-Resolution Images – All LED coaxial, substage profile, and SmartRing™ light illumination comes standard
Sturdy, Stable Construction – Fixed granite bridge and base rest on a sturdy steel support structure to provide a rigid, orthogonal structure for measurement stability
Multisensor Versatility – Optional TP-20 and TP-200 touch probes, SP-25 Scanning Probe, Feather Probe™, Through-the-Lens (TTL) Laser, Rainbow Probe™, TeleStar® Probe
| Standard | Optional | |
| XYZ Travel | 450 x 600 x 200 mm | Extended Z-axis: 300 or 400 mm |
| XYZ Scale Resolution | 0.1 μm | 0.05 µm |
| XYZ Volumetric Accuracy | E3 = (3.0 + 5L/1000) μm | |
| XY Area Accuracy | E2 = (1.8 + 5L/1000) μm | |
| Z Linear Accuracy | E1 = (2.5 + 5L/1000) μm | E1 = (2.0 + 5L/1000) µm (requires touch probe or TTL laser) E1 = (1.5 + 5L/1000) µm (requires TeleStar Probe) |
SmartScope® M130 is the next evolution of the worldwide standard in 3D multisensor metrology, ideal for manufacturers inspecting large or heavy parts.
The patented IntelliCentric-M Optical System features fully telecentric fixed lens optics and VIRTUAL ZOOM™ technology, paired with a high-density 20 MP digital metrology camera and a built-in electronic aperture, delivering an ultra-high-resolution image with low distortion – perfect for high-speed edge detection metrology.
Ultra-High-Resolution Images – All LED coaxial, substage profile, and SmartRing™ light illumination comes standard
Sturdy, Stable Construction – Fixed granite bridge and base rest on a sturdy steel support structure to provide a rigid, orthogonal structure for measurement stability
Multisensor Versatility – Optional TP-20 and TP-200 touch probes, SP-25 Scanning Probe, Feather Probe™, Through-the-Lens (TTL) Laser, Rainbow Probe™, TeleStar® Probe
| Standard | Optional | |
| XYZ Travel | 790 x 815 x 200 mm | Extended Z-axis: 300 or 400 mm |
| XYZ Scale Resolution | 0.1 μm | 0.05 µm |
| XYZ Volumetric Accuracy | E3 = (3.2 + 5L/1000) µm | |
| XY Area Accuracy | E2 = (2.0 + 5L/1000) µm | |
| Z Linear Accuracy | E1 = (2.5 + 5L/1000) µm | E1 = (2.0 + 5L/1000) µm (requires Touch Probe or TTL Laser) E1 = (1.5 + 5L/1000) µm (requires TeleStar Probe) |
SNAP™ 100 is a compact unit equipped with a Large FOV Telecentric lens and a fixed stage with a 62 mm x 46 mm measuring area. Measure-X™ metrology software supports simple “walk up and measure” use, comparison to an electronic overlay, creation and running of automatic programs, including complex measurements and GD&T. AutoID limits operator requirements.
SNAP™ 300 is a compact unit equipped with a Large FOV Telecentric lens and a motorized stage with a 250 x 150 mm measuring area. Dual-Mag optics increase capability by providing a much larger magnification range, even within a program. Measure-X™ metrology software supports simple “walk up and measure” use, comparison to an electronic overlay, creation and running of automatic programs, including complex measurements and GD&T. AutoID limits operator requirements.
Maximum measuring range (mm)
Standard 250 x 150 mm
Optics
Standard = Telecentric, dual optical magnification with 100 mm low mag field of view and 4X high magnification lens
Optional = 10X high mag lens in lieu of 4X lens
Illumination
All LED monochromatic substage profile light, programmable 8 sector ring light, and coaxial through-the-lens surface light.
