ALGOL-JISC LOAD TESTER
- A TESTER WITH A COMPUTER
The MAX series is a tester with intelligence. As it can memorize the operated test sequence so that you don't have to re-set conditions to repeat the same test.
- BUILT-IN USB DRIVE
The MAX series is a load tester with built-in USB drive on it. When used in production line, it is not necessary to bring a personal computer into the line. A USB Thumb Drive with stored test result can be taken out from the tester to examine in other place
- DISPLAY AND PRINTING
You can see the test results and a curve of load displacement on the high density LCD on the MAX tester and also the built-in printer can print our. The CENTRONICS INTERFACE enables the outside printer to print test results out in form of test report. (ESCIP based)
- DATA PICK UP FUNCTION
The standard software on the MAX can perform most of general compression/tension load test. Its data pick-up function can pick appointed data up from measured results.
- PROGRAM CHANGED BY USB
Since the MAX series is operated with a program that has been installed with a USB, it is easy to change its operation program. In other word, one MAX tester can be used in multiple purposes.
MAX-XXX-B | MAX-XXX-S | MAX-XXX-H | |
LOAD CELL | 5 CHANNEL | ||
MEASUREMENT RANGE | NON STEP AMPLIFIER | ||
TEST SPEED | 1 ~ 1000 mm/min VARIABLE | ||
UNIT SELECTION | mN / N / KN / gf / Kgf / lbf | ||
DISPLAY | LCD DISPLAY 640X480 | ||
DATA STRONG | APPROX. 100 CURVES / 1FD | ||
LINEAR ACCURACY | (20 + 0.1L) µm | (10 + 0.1L) µm | |
STROKE | 300mm | 250mm | |
LENGTH RESOLUTION | 0.01mm | 0.001mm | |
POWER SUPPLY | AC100 ~ 120 / 200 ~ 240V |
MAX-XXX-B/S/H | |||||
---|---|---|---|---|---|
Loadcell Type | Fixed | Exchangeable | |||
Dimension | Table Top W460xD400xH530 | ||||
Order No | MAX-10N | MAX-100N | MAX-500N | MAX-1KN | |
Load Capacity | N | 10N | 100N | 500N | 1kN |
kgf | 1kgf | 10kgf | 50kgf | 100kgf | |
Min. Load Capacity | N | 0.1m/N | 0.001N | 0.01N | MAX-1 / 100000 |
kgf | 0.01gf | 0.1gf | 1gf |